Avanti refrigerator troubleshooting

American brand of refrigerators Avanti is not very well – known on the market of refrigeration equipment. However, its refrigerators differ by reliability and quality. The table below shows Avanti refrigerator troubleshooting system.

Avanti FF993W refrigerator troubleshooting

ProblemPossible cause
Unit does not operate.Not plugged in.
The circuit breaker tripped or there is a blown fuse.
Compressor turns on and off frequently.The room temperature is hotter than normal.
A large amount of food has been added to the refrigerator - freezer.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The refrigerator -freezer does not have the correct clearances.
Vibrations.Check to assure that the refrigerator - freezer is level.
The unit seems to make too much noise.The rattling noise may come from the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your refrigerator - freezer.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The unit is not level.
The door will not close properly.The unit is not level.
The door is reversed and not properly installed. The gasket is dirty.
The baskets are out of position.

Avanti RA751WT refrigerator troubleshooting

PROBLEMPOSSIBLE CAUSE
Appliance does not operate.Not plugged in.
The circuit breaker tripped or blown fuse.
Appliance does not cool.The appliance temperature control is set at “0”
Compressor turns on and off frequently.Condenser coil at the back of the unit is dirty. The room temperature is hotter than normal.
A large amount of food has been added to the appliance.
The door is open too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal properly.
The appliance does not have the correct clearances. (5” to both sides and back of unit)
The light does not work.The home circuit breaker or fuse has tripped. The appliance is unplugged.
The bulb has burned out (see the maintenance section for the replacement procedure).
Vibrations.Check to assure that the appliance is level.
The appliance seems to make too much noise.The rattling noise may come from the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your appliance.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The appliance is not level.
The door will not close properly.The appliance is not level.
The doors were reversed and not properly installed.
The gasket is dirty.
The shelves, bins, or baskets are out of position.

Avanti RM252 refrigerator troubleshooting

ProblemPossible cause
Refrigerator does not operate.Not plugged in.
The circuit breaker tripped or a blown fuse.
The refrigerator temperature control is set at “0” position.
Turns on and off frequently.The room temperature is hotter than normal.
A large amount of food has been added to the refrigerator.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal properly.
The refrigerator does not have the correct clearances.
Vibrations.Check to assure that the refrigerator is level.
The refrigerator seems to make too much noise.The rattling noise may come from the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your refrigerator.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The refrigerator is not level.
The door will not close properly.The refrigerator is not level.
The door was reversed and not properly installed. The gasket is dirty.
The shelves, bins, or baskets are out of position.

Avanti SHP1799CAD refrigerator troubleshooting

ProblemPossible cause
Beverage Cooler does not operate.Not plugged in.
The appliance is turned off.
The circuit breaker tripped or a blown fuse.
Beverage Cooler is not cold enough.Check the temperature control setting. The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Turns on and off frequently.The room temperature is hotter than normal.
A large amount of contents has been added to the Beverage Cooler.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly. The door gasket does not seal properly.
The light does not work.Not plugged in.
The circuit breaker tripped or a blown fuse. The light button is “OFF".
Vibrations.Check to assure that the Beverage Cooler is level.
The Beverage Cooler seems to make too much noise.The rattling noise may come from the flow of the refrigerant, which is normal.
As each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant in your Beverage Cooler.
Contraction and expansion of the inside walls may cause popping and crackling noises.
The Beverage Cooler is not level.
The door will not close properly.The door is misaligned.
The Beverage Cooler is not level. The gasket is dirty.
The shelves are out of position.
Display flashes Error message “EO"Connection failure - there is a wire or component that is not connected correctly.
Display flashes Error message “E1"Temperature sensor failure.
Display flashes Error message “E2"Defrost sensor (Coil Sensor) failure.
Display flashes Error message “HH" Display flashes Error message “LL"Temperature of inner cabinet is over 99°F / 37°C Temperature of inner cabinet is under 32°F / 0°C