Liebherr Freezer error codes

Liebherr BioFresh Freezer error codes

ProblemPossible CauseCorrection
An LED at the lower rear of the appliance (near the compressor) flashes regularly every 5 seconds.There is a fault.► Contact the customer service department
The temperature display indicates: F0 to F9.There is a fault.► Contact the customer service department
DEMO lights up in the temperature display.The demo mode is activated.► Contact the customer service department

Liebherr GFT50S2HC Freezer error codes

Error codes displayedCause and further action
E0 or E1Sensor error. > Contact the customer service department.
EE or EFError in the electronic control system. > Contact the customer service department.
L0Temperature in the interior is too low. > Contact the customer service department.
HITemperature in the interior is too high (warm). > First make sure that the door is closed properly. If the HI display does not disappear after approx half an hour, contact the customer service department.
dorThe appliance door has been left open for more than 1 minute. > Close the door.
HF or HAThere has been a power outage (HF) of some length or the interior was too warm or too cold (HA).