Indesit Fridge Freezer troubleshooting

Indesit fridge freezer troubleshooting

If you have problems with your Indesit freezer, don’t worry because troubleshooting guide awaits for you. It gives some variants on what you can do if possible issues tend to appear. The instructions are so simple that everyone can use them in order to eliminate the problem. If that doesn’t help, you will have to call the professional service. In most cases the instructions are useful.

Indesit LD70 N1 X Fridge Freezer Troubleshooting

What to do if...Possible reasonsSolutions
The fridge freezer not workingThere may be an appliance power supply problem.Check if power cable plugged into a live socket with the proper voltage.
Check if the protection devices and fuses of the electrical system in your home
There is water in the defrost pan.This is normal in hot, damp weather. The pan can even be half full.Make sure the appliance is level so that the water does not overflow.
The edges of the appliance cabinet, which come in contact with the door seal, are warm to the touch.This is not a defect.
This is normal in hot weather and when the compressor is running.
The light does not work.The light may need replacing.Make sure if the protection devices and fuses of the electrical system in your home work well.
The appliance may be in On/ Stand-by model.Check if the power cable is plugged into a live socket with the proper voltage
In case the LEDs are broken the user must call the Service for exchange of the same type available only at our After- sales Service Centers or authorized dealers.
The motor seems to run too much.Motor running time depends on different things: number of door openings, amount of food stored, temperature of the room, setting of the temperature controls.Make sure that the appliance controls are correctly set.
Check if there is not a large amount of food been added to the appliance.
Check that the door is not opened too often.
Check that the door close properly.
The appliance temperature is too high.There could be various causes Make sure that the condenser (back the appliance) is free of dust and fluff.
Make sure that the door properly closed.
Make sure that the door seals properly fitted.
On hot days or if the room is warm, the motor naturally runs longer.
If the appliance door has been left open for a while or if large amounts of food have been stored, the motor will run longer in order to cool down the interior of the appliance.
The doors do not open and close properly.There could be various causes Check that food packages are not blocking the door.
Check that the internal parts or automatic ice maker are not out of position.
Check that the door seals are not dirty or sticky.
Ensure the appliance is level.

Indesit LR6 S1 W Fridge Freezer Troubleshooting

Problem Solution
The internal light does not illuminate• The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.
• The TEMPERATURE ADJUSTMENT knob is not in the correct position.
• Varies by number and/or position, available only on certain models
The motor does not start• The appliance comes with a motor protection control
The refrigerator and the freezer do not cold well• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The refrigerator or the freezer have been over-filled
The food inside the refrigerator is beginning to freeze• The TEMPERATURE ADJUSTMENT knob is not in the correct position
The motor runs continuously• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high
The appliance makes a lot of noise• The appliance has not been installed on a level surface .
• The appliance has been installed between cabinets that vibrate and make noise.
• The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal
Some of the external parts of the refrigerator become hot• These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product

Indesit CTAA 55 NF S WD Fridge Freezer Troubleshooting

Problem Solution
The interface is off• The plug is not inserted in the outlet, or it is not powerful enough to create a contact, or there is no electricity in the house
The motor does not startThe appliance comes with a motor protection control
The alarm soundsThe refrigerator door has remained open for more than two minutes (the buzzer will stop sounding when you shut the door) or the correct switching-off procedure was not followed
The refrigerator and the freezer do not cool well• The doors do not close properly or the seals are damaged.
• The doors are opened too frequently.
• The FRIDGE TEMPERATURE is not correct.
• The refrigerator or the freezer have been over-filled
The food inside the refrigerator is beginning to freeze• The FRIDGE TEMPERATURE is not correct.
• The food is in contact with the back inside wall of the refrigerator
The motor runs continuously• The SUPER FREEZE button was pressed: the yellow SUPER FREEZE indicator is on .
• The door is not closed properly or is continuously opened.
• The outside ambient temperature is very high
The appliance makes a lot of noise• The appliance has not been installed on a level surface
• The appliance has been installed between cabinets that vibrate and make noise.
• The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal
The back wall of the refrigerator unit is covered in frost or droplets of water• This shows the appliance is operating normally

Indesit XD95 T1I W Fridge Freezer Troubleshooting

Problem Solution
Your refrigerator-freezer will not operate— The power supply cord is unplugged
The doors will not close completely— The drawers are out of position.
— The gaskets are dirty.
— The refrigerator-freezer is not level
The refrigerator-freezer is noisy when runningCheck the refrigerator-freezer is level and it is not in contact with another appliance or kitchen furniture
The refrigerator-freezer does not cool sufficientlyIf the door has been opened too often, or it has been left open for a while it will take time for the refrigerator-freezer to reach its set temperature.
Check the airflow the rear of the refrigerator-freezer has not been reduced due to insufficient clearance.
The following characteristics should not be looked upon as a problem.
A gentle tricking sound caused by coolant flowing the pipe.
Compressor operating at high temperature

Indesit SI8 1Q WD Fridge Freezer Troubleshooting

Problem Solution
The POWER indicator light does not illuminate.The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.
The refrigerator and the freezer do not cool well.The doors do not close properly or the seals are damaged.
The doors are opened too frequently.
The TEMPERATURE ADJUSTMENT knob is not in the correct position
The refrigerator or the freezer have been over-filled
The food inside the refrigerator is beginning to freeze.The TEMPERATURE ADJUSTMENT knob is not in the correct position.
The food is in contact with the back inside wall of the refrigerator.
The door is not closed properly or is continuously opened.
The motor runs continuously.The outside ambient temperature is very high.
The thickness of the frost exceeds 2-3 mm
The appliance makes a lot of noise.The appliance has not been installed on a level surface
The appliance has been installed between cabinets that vibrate and make noise.
The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.
The water discharge hole is blocked
There is water at the bottom of the refrigerator.These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.
Some of the external parts of the refrigerator become hotThis shows the appliance is operating normally.
The back wall of the refrigerator unit is covered in frost or droplets of waterThe water discharge hole is blocked
There is water at the bottom of the refrigeratorThe water discharge hole is blocked
Icing water at rear of the FridgeMake sure that the "Fast Freeze switch” is NOT in the ‘ON’ position, this will cause 100% run. If switch is not in ON position and severe icing persists, set temperature regulating knob to lower position.
Excess moisture / Ice at rear of the FridgeExcess moisture / Ice will occur if the Larder door is opened for prolonged periods. This will disappear once the door is closed and the Larder allowed to defrost and drain the moisture away. This is normal for cooling function of the Larder compartment, especially in summer period.
Warm FridgeIf room temperature is 7 C or lower, (for example the product is located in a garage or out building), for the refrigerator to operate correctly the “Fast Freeze switch" must be in the ‘ON position